Realacc Horns 3D FPV Racing Quad

Realacc Horns 100 3D FPV drone

In order to allow fully immersed flight experience, the Realacc Horns 100 quadcopter is equipped not with just one but two cameras. For me personally, being fully immersed (using FPV goggles) makes me feel a bit uncomfortable and I would rather prefer a FPV monitor giving me the ability to switch quickly between LoS (line of sight) and drone view.

Each 600TVL camera has its own 5.8G VTX module allowing to individually set the desired broadcast channel. In order to be able to enjoy the full potential of the dual camera system you will need a dedicated 5.8G 3D FPV goggles.

Featuring half-inverted motors, the design of the Realacc Horns 100 drone is very unique and futuristic. The 7500KV brushless motors are equipped with orange penta-blade propellers.

According to your existing transmitter you can opt for large variety of RX modules:

  • Compatible Frsky D8 mode SBUS receiver (RSSI ready);
  • Original Frsky D16 mode SBUS receiver (Smart port ready);
  • Compatible Flysky 8ch AFHDS2A receiver I-Bus output with Failsafe;
  • Compatible Specktrum DSM2/DSMX receiver.

As I just received my QX7 transmitter, I think I will order for review a Realacc Horns 100 with one of the FrSky receivers.

Realacc Horns 100 highlights

  • Extremely light and powerful flying machine;
  • Robust carbon fiber air-frame;
  • Dual cameras & video transmitters for 3D FPV;
  • Adjustable camera angle;
  • Versatile Minicube F3 6DOF flight controller flashed with BetaFlight firmware;
  • OSD, real-time flight data transmission;
  • Telemetry RSSI Output ready (Frsky D8 Version).
  • Smart port ready (Frsky D16 Version);
  • Multiple flight modes (Acro, Air and Angle);
  • 4 in 1 10A BLHELI_S ESC;
  • Reliable brushless motors;
  • Penta-blade propellers;
  • Telemetry RSSI Output ready (Compatible Frsky D8 Version);
  • Compatible with 2s and 3s Li-Po batteries.

Realacc Horns 100 main parts and included accessories

  • Realacc Horns 100 carbon fiber frame kit;
  • Minicube F3 6DOF flight controller with build-in OSD and buzzer;
  • Optional FrSky D16 receiver, FrSky D8, DSM2/DSMX or FlyFky AFHDS2A radio receiver;
  • 1 set of Realacc 1104 7500KV brushless motors (2x CW and 2 x CCW);
  • Minicube 10A BLHELI_S 16.5 2-3S 4 in 1 ESC (Dshot600);
  • 2 sets of 50mm 5-blades propellers;
  • 2 pieces of 600TVL HD CMOS camera with 5.8G 25MW 48CH VTX;
  • 11.1V 400mah 80C Li-Po battery with JST plug;
  • User manual.

LEAVE A REPLY

Please enter your comment!
Please enter your name here