GTENG T908W review: Wannabee DIY drone

2
GTENG T908W review

GTENG T908W it is advertised as to be a DIY quadcopter but, if you ask me, it is more like a modular drone. You don’t need to solder or something like this, just put together the main parts and you are ready to fly.

In my opinion the fact that a drone can be easily split into parts should not scare you. While assembling the GTeng T908W you will learn a bit about how these flying things work. You can experiment what happens if one motor fails or if it rotates in wrong direction.

Sponosored AD

GTENG T908W review - Components

GTENG Winner T908W drone highlights

  • Easy to assemble modular design;
  • Grilled propeller protectors for safe indoor flights;
  • Barometric altitude hold (auto hover);
  • Multiple speed rates;
  • APP control;
  • Motor protection;
  • 0.3MP camera for photos and videos;
  • WiFi real-time image transmission;
  • About 6 ~ 8 play time.

My first “contact” with GTeng was through their FPV watch. The T909 is a easy to use wearable FPV monitor.

GTENG T908W quadcopter review

Disclosure: I received this Winner T908W drone as part of a product review collaboration with Banggood. Although the product was offered as gift, all the opinions in this review remain my own. As usually, they have not even tried to suggest the way how to write my article.

GTENG T908W drone review - What inside the box

With “standard free shipping“, the package arrived in about 3 weeks. No paper work or custom fees. Inside the box I found, besides the drone and its remote controller, a complete set of spare propellers, USB battery charger, screewdriver and user manual.

The aircraft comes fully assembled but it can be split into pieces in a moment.

At first look, the GTENG T908W resembles to the much expensive SIMTOO MOMENT Airselfie drone. It adopts similar caged propellers and longish fuselage.

Unfortunately all propellers and blade protectors are black, so during day flights it is very hard to determinate the orientation of the aircraft. A and B fans have different connector so you can’t accidentally mix them.

GTENG T908W drone review - Design

The power button is located on the top of the aircraft. Being a “soft” button I recommend to remove the Li-Po when the GTENG T908W is stored for longer periods. Charging port is located on the fuselage – which is lame because the 750mAh battery must stay inside of the drone while refuel.

During night flights you will be guided by four LED lights. Two blue ones on front and two red ones on back.

GTENG T908W review: Remote controller

Like the aircraft, the transmitter is also fully black. It comes with foldable phone holder and it is powered by 2 pieces of AAA batteries.

Featuring alt-hold, both sticks are centered. On front panel are in total 8 buttons, grouped two by two.

GTENG T908W review - Transmitter

While the left shoulder buttons allow to Take off or Land, the right one enables headless mode (by long pressing) and RTH (by short pressing).

Switching between flight speed rates can be done by pressing the left stick as like a push-button.

Calibrating the GTENG T908W can be achieved by moving both sticks to the lowest left position.

GTENG T908W drone review - App control

Although in the T908W’s specifications there is nothing mentioned about the APP control, after I installed the suitable application (by scanning the QR code from the box) I found out that actually I can control it in 3 ways:

  • physical remote controller;
  • through “GT FPV” APP with virtual sticks;
  • gyro mode by tilting my smartphone.

GTENG T908W review: Camera

The 0.3Mp WiFi FPV camera is removable. No angle adjustment nor micro SD slot. Captured files (photos and videos) are stored on the smartphone’s internal memory under the “Drone” folder.

Four minutes of recorded video (640 × 480 @ 15 fps) occupies about 16 MB. Definitely, the image quality is not the strengths of this drone. Both, bit rates and frame rates, are too low. Lack of vivid colors is also an issue.

GTENG T908W drone review - Camera and WiFi FPV

WiFi real-time image transmission is cool but there is a noticeable latency compared to 5.8G solutions, so FPV flying through VR goggles is like Russian-roulette.

GTENG T908W review: Test flight

Prior to your flight, you need to arm the motors by moving both sticks to the lowest-outer position. Pressing the “Take-off” button, the aircraft will start to rise in the air.

Being a smooth and gentle flyer you will never win any race with the GTENG T908W. Switching between speed rates does not make much difference. Due to its poor wind resistance I would recommend it more for indoor than outdoor flights.

If it crashes up-side down, the motors will be automatically stopped.

My first flight ended after 4 minutes. Frankly a bit less that I would expected. With similar toy drones I managed to stay airborne up to 7 minutes. Without the camera module you can probably earn some extra play time.

The GTENG T908W comes with free shipping and can be ordered from here for $51.99. Unfortunately, being a new product we need to wait for spare parts availability.

GTENG T908W drone review - Verdict

What I liked

  • Safe for indoor flights;
  • Modular design;
  • Altitude hold works nice;
  • Multiple control modes.

What I didn’t liked

  • Very slow;
  • Poor wind resistance;
  • A bit expensive for what it offers.
GTENG T908W review: Photo gallery

2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here