JJRC X1 quadcopter review

JJRC X1 review

I started my journey in the world of quadcopters with a cheap brushed drone because, at that time, it didn’t exist affordable brushless models like this JJRC X1. Based on my experience, the biggest problem with the cheaper brushed DC motors is that after only 10-15 flights they burn out.

When it comes to cheap models, I consider that it is enough to read some product reviews before I place my order. But now, as I’m planning to purchase a Phantom 3 Advanced, I wanted to hold it in my hand before I pay $1000 for it, not just to watch a few YouTube test videos.  So I decided to enter a drone shop for the first time. Frankly, I was surprised how many interesting quadcopters they have in stock, including some that I haven’t heard about. The sellers from the store were very helpful and it is good to know that there is a place where I can check models that are way over my budget. Enough now with the off-topic and let’s return to the JJRC X1.

Two months ago my attention was captured by two similar products, the X1, and the YIFEI M-250. Except for the remote controllers, these two multi-rotors seemed to be almost identical. Because previously I had some good experiences with the JJRC products, I opted for the JJRC X1.

JJRC X1 review and test

The X1 quad is sold in two different boxes. A smaller compact one, where the props are not installed on the aircraft and a bigger one that I received too. Just a note, this product was provided by Banggood for a fair review, thanks again for their professional attitude.JJRC X1 review and test

JJRC X1: First impression

The box is big compared to the size of the aircraft, so no wonder JJ RCToy decided to make a smaller one to reduce the shipping costs, which is probably a significant part of the total price of the product.

Compared with other similar-sized brushed quadcopters, this JJRC X1 has a bigger weight. One hand is because of the heavier brushless motors and the other one is because the airframe is made from a thicker plastic.

At first sight, the aircraft has a very good build quality and it feels good in my hand. The glossy black finish grants a very professional look for this remote-controlled toy.

Besides the aircraft and its remote controller, I found in the box the following:

  • 2s 7.4 1300mAh Li-Po battery;
  • 2s balance battery charger;
  • 1 set of spare blades;
  • 1 set of propeller protectors;
  • Two pieces of landing gears;
  • Small bag of screws;
  • Wrench tool;
  • Screwdriver;
  • JJRC X1 user manual (Chinese and English).JJRC X1 review - inside the box

I have to mention that it’s a good job to include an extra set of spare propellers. They are often damaged during crashes, and who wants to wait three weeks till the next flight for a tiny piece of plastic?

The propellers were preinstalled but I had to install the prop guards and landing gears by myself. Being a powerful brushless quad, I recommend installing the blade protectors before the first flight. They can prevent crash damage and possible injuries.

On top of the aircraft, there is a small piece of plastic that can be confused with a GPS antenna. It is only part of the design, without any real functionality.JJRC X1 review - motor

Unfortunately, the JJRC X1 comes without any camera, but there’s always hope :D. Under the belly of the aircraft, there are some camera hooks and a tiny connector called “CAN bus”, which is a clue about the manufacturer’s plan to come up with the feature with an X1C model.

For those who don’t want to wait for the newer version of the JJRC X1, SeByDocKy (one of the biggest RC enthusiasts on RcGroups.com) confirmed that the X1 is compatible with the Syma X5SC FPV kit. So, for about $170, they can have a complete first-person view brushless quad.

In the future, I plan to give it a try for installing my RunCam 2 camera on this quad, hopefully, will endure bravely the additional 50g weight.

JJRC X1: Flight time

The aircraft is powered by a 2s 1300 mAh Li-Po battery, which allows about 12-15 minutes of playtime. The battery is loaded into the tight compartment from the rear part. Unfortunately, there is no chance to push a larger battery with higher capacity into the battery bay. Those unwilling to wait 90 minutes between flights needed for recharge can opt for a secondary battery for the price of $8.50.JJRC X1 review - Transmitter

JJRC X1: Transmitter and range

Frankly, although the transmitter has a nice design, I don’t like it that much. It seems to be a cheap toy rather than an entry-level one. Anyway, the advertised 300-400 meters sounds pretty cool. I’m curious if it will be confirmed on the flight field.

With the right-top button, the aircraft can be switched between 3 rate modes (10% – normal mode, 25% – comfortable flight mode, and 45% fast speed mode).

When the supply voltage of the transmitter drops under 4.5 volts, the power LED will flash, and a “DiDi” alarm sound will warn the operator that is time to replace the batteries of the remote controller.

JJRC X1 arming

The manufacturer decided to adopt a new two-step arming sequence for this X1 quad, probably in order to prevent the accidental arming of the motors by kids who may end up with painful injuries. To arm your quadcopter, you have to follow these two steps:

  • push and hold the left stick to the lowest-left position and the right stick to the lowest-right position (both sticks at the same time!) till a “DiDi” sound confirms that the quad is unlocked;
  • Move the left stick to lowest-right, then lowest-left, and again to lowest-right and the propellers will start spinning.JJRC X1 test flight

JJRC X1: Flight performance

I’ve just returned from my first flight attempt with this quad. It seemed to be a perfect sunny winter day for some maiden flight, but the -5 °C and moderate wind were to much for this small quad.

As my reviewer fellows said, it is fast, and it has a very good control range and flight autonomy but what I found out today is that it is hard to control it against the moderate wind. Becoming bored after 9 minutes of “windsurfing” I decided to land and go back tomorrow for a second flight…JJRC X1 review - Crash

JJRC X1 unboxing and quick test video

Pricing and availability

You can find its price on the Banggood website, which is $119.99. You can also find the mentioned cheap FPV kit for $51.99 there.

JJRC X1G with 5.8G FPV

Finally, JJRC decided to add an FPV system to this nice quadcopter. The new version is called JJRC X1G, and it comes with a 5.8G FPV 600 TVL camera and a 4.3″ FPV monitor.

The new JJRC X1G comes with the same nice design. The transmitter also remains unchanged.

REVIEW OVERVIEW
Price/performance ratio
Design and build quality
Transmitter / Range
Battery life
Senior editor and co-founder of FirstQuadcopter.com. Everything started about 4 years ago when I purchased my first drone. I still own that Syma X5C . Since then I have had the luck to review and test more than 100 drones.
jjrc-x1-quadcopter-reviewIf you are asking me whether I recommend this JJRC X1 as the first quadcopter for newbies, I will hesitate with my answer. But as the second one, it is definitely a good choice, especially for sporty pilots. It doesn't promise tons of features but is surprisingly fast, and probably there is no other model with brushless motors in its price range. Being lighter than other robust racer quadcopters, I think they will successfully survive the small crashes. Anyway, the market is full of spare parts for it, so if something goes wrong, the X1 can be repaired easily and inexpensively. <br> Pros<br> +Brushless motors;<br> +Nice sporty design;<br> +3 different moderates;<br> +Existence of spare parts;<br> +Excellent control range (about 300-400 meters);<br> +About 12-15 minutes flight time;<br> <br> Cons<br> -Complicated arming sequence;<br> -Unknown flight controller;<br> -Too lightweight to handle moderate wind;<br> -Poor LED lights;<br> -A bit expensive for what it offers.<br>

8 COMMENTS

  1. I have read in other pages that it weight around 1.18kg, but you mentioned in cons section that “Too lightweight to handle moderate wind;”. Would you kindly clarify that please? Just trying to figure it out if it can be flown without FAA.

  2. I had very strange experience with this JJRC-X1 yesterday. I was flying it above local soccer field, and after about 3 minutes of flight it started flying on it’s own. I mean, it didn’t listen my controls at all. I tried to land it but it just keept flying forward…
    After 30 sec everything went back to normal. Weird but I’m pretty happy it didn’t fly away like my other models :)

    • There’s certainly a yaw-lag and it’s rather annoying. Might there be anything to do about that?
      I came on this quadcopter blog because I was googling for ‘can port’, which you mention. I’ve seen that port on the bottom of my JJRC X1 but have no clue what it means.
      Any idea?

    • yes that happen also to my friend’s JJRC X1 drone..the yaw issue..and also when it take of i have to counter with pitch stick forward to make it hover…and also counter roll right to make it stable…after i compare with mjx bug3 , bug3 is better than jjrc x1

LEAVE A REPLY

Please enter your comment!
Please enter your name here