Currently there is a large variety of FPV goggles on the market, from cheap ones like this KDS Kylin to very expensive ones that can cost even $ 700. Being not too familiar with FPV goggles I wanted firstly to test something cheap in order to see if it’s worth investing more in a high-end model. This is the reason I chose this KDS Kylin Vision, for $70 it seemed to be a great choice for my first FPV glasses.
I heard for the first time about the KDS Model manufacturer when they announced the Kylin 250 racing quadcopter. Probably, in order to offer a complete FPV experience, not long after the launch of their quad, they came up with these cheap FPV goggles. The Kylin Vision FPV goggles were designed to be sold in a bundle with their racing quad but can also work as well with any other 5.8G FPV system.
Certainly, FPV goggles are designed to provide the ultimate first-person view (FPV) experience, but in my opinion, they are suitable only for experienced pilots. Beginners should first practice the basic flight movements on non-FPV mode. Then, after several hours of flights, they may try FPV screens (like Eachine LCD5802D). This kind of gadget helps to switch from LoS (Line of Sight) flights to fully FPV flights. Basically, it is an intermediate step before FPV goggles.
KDS Kylin Vision FPV goggles review
When I’m planning to purchase a quadcopter or a related accessory, I always try to see if any of my partners are interested in offering a free sample, so basically, most of the products that are reviewed here on FirstQuadcopter.com are products that I’m personally interested in, not just trying to promote them to make a profit share.
After I agreed with Alice from GeekBuying on this product review, the package was sent out in a few days and delivered in about one week.
As I previously mentioned in my recent quadcopter news, for the last few days, I was on a holiday at the Black Sea and the package was picked up by a friend. Although I was very tired from the long trip back home, being enthusiastic to test and review this KDS Kylin FPV Goggles, I immediately contacted my friend to retrieve the package.
KDS Kylin Vision FPV goggles review – First impressions
To avoid damages during shipping, the FPV glasses came in two boxes: a regular brown cardboard box and a more fancy one.
Inside the box, I found a mini USB charging cable beside the Kylin Vision Goggles and a 5.8G mushroom antenna. The 2000 mAh Li-Po battery was preloaded into the goggles but not connected.
In my opinion, the KDS Model did a good job; it feels very comfortable to wear the FPV goggles, and I liked both the design and build quality. The straps are adjustable so it’s easily adapted to any head size.
To be honest, there is a drawback of this compact and lightweight design for those who are permanent bearers of eyeglasses. It is almost impossible to use this Kylin Vision together with glasses.
On the top part, there is an SMA connector where you can attach the included 5.8G antenna.
The six control buttons, the charging indicator LED, and the mini USB power/charging port are located on the left side of the FPV goggles.
The “Menu” button allows you to switch between:
- brightness level setting;
- contrast level setting;
- color saturation (RGB) adjustment;
- automatic channel search;
- manual CH scan.
Two sound level dedicated buttons (Vol+ and Vol-) can be used in case your FPV system is with sound (microphone).
KDS Kylin FPV glasses features and specs
- Integrated 5.8G 64 CH receiver (full-band 5645M – 5945M);
- 5″ LCD screen (800 x 480);
- SMA antenna connector;
- 1s 2000 mAh Li-Po battery;
- Adjustable brightness, contrast and saturation;
- Built-in loudspeaker with volume control;
- Mini USB charging port;
- Weight with battery and antenna: 488 g;
- Dimensions (L x W x H): 10.90 x 16.90 x 16.90 cm.
KDS Kylin FPV glasses review – Usage
After I attached the antenna and connected the battery, I started to search for my quadcopter’s FPV signal. I got a clear image on the display in just a few seconds.
Frankly, for the first time, it was a very strange sensation to see through the quadcopter “eyes”. It felt dizzy, but probably after several hours of flight, I will get used to the feeling (at least I hope so).
I tested the goggles with four of my 5.8G FPV quadcopters to confirm its compatibility. I got a clear and stable video with all of them.
The OSD values of my Walkera Runner 250 quadcopter were clearly displayed and easily readable.
I managed to fly about 250 meters until the video signal became jerky. Of course, the FPV range may vary greatly by the emitting power of the TX module.
While these KDS FPV goggles is very comfortable, I noticed that after a short time of wearing them, I started to sweat under it (outside was indeed more than +30 C degrees).
Indeed, it is an incredible sensation playing with your racing quadcopter using FPV goggles. It is different from LoS flights.
Because there is a standby power usage to protect the battery, this one must be unplugged when the FPV goggles is stored.
Nice entry level goggles.
It has the same issue as the JJRC JJPRO-F01 goggles, the battery dies if you don’t disconnect it after every usage. My battery swelled after 2 months and now it charges only at half of its capacity (~1000mAh).
Do you know where to order another battery for the JJRC JJPRO – F01 / KDS Kylin FPV Goggles?
BTW, definitely I will add a “hard” power switch to the goggles!!!!
Great review!
There are any significant differences between the JJRC JJPRO – F01 and the KDS Kylin FPV Goggles?
I need urgently I good and cheap FPV glasses but I don’t know which one should buy….
This FPV glasses is also sold under the name: JJRC JJPRO-F01 Vision!
pretty cool, excepting that it not has raceband!
BTW, I just saw a nice hack, a dude added an external DVR to this KDS Kylin FPV Goggles in order to record his flight.