The newly announced NamelessRC Besthawk FPV drone will be available in two versions, with and without built-in DVR. Both versions features Caddx EOS2 camera and D400 5.8G VTX with up to 400 mW transmission power.
NamelessRC Besthawk is build on a 75mm size carbon fiber frame with large Tiny Whoop style ducted blade guards. All the electronic parts all well protected by a 3D printed canopy. The 11000KV motors are paired with 4-leaf propellers.
According to the manufacturer’s specs, the Besthawk Whoop drone can be powered by 2s as well as by 3s batteries.
NamelessRC Besthawk main features & technical specs
- 75mm wheelbase;
- Carbon fiber frame with nylon Whoop guards and 3D printed protective canopy;
- NameLessRC AIO412 flight controller w/ built-in BEC;
- 1103 type 11000KV brush-less motors with connectors;
- 40mm 4-leaf propellers (1.5mm mounting hole);
- NamelessRC D400 25-400mW VTX
- Optional DVR AIO 720P DVR;
- Caddx EOS2 1200TVL FPV camera;
- Optional FrSky, FlySky, DSMX/2 or TBS Crossfire Nano radio receiver;
- 2-3s LIPO compatible (300~450mAh suggested).
NamelessRC Besthawk main parts details
NameLessRC AIO412 flight controller specs
- Input Voltage: 2-4S Lipo / HV Lipo;
- CPU: STM32F411CEU6 (100MHZ);
- Sensor: MPU-6000 (connected by SPI)
– Built-in Betaflight OSD
– Built-in 5V 2.5A BEC Output with LC Filter
– Built-in Current Sensor
- Size: 28.5×28.5mm ;
- Net Weight: 4.2 grams.
Built-in ESC specifications
- Power supply: 2-4S LiPo/LiPo HV ( 7.4-17.4V);
- Continue Current: 12A;
- Burst current: 15A;
- Firmware: BLHELI_S;
- Motor Connectors: 1.25mm header pins connector;
- Default protocol: DSHOT600.
NamelessRC D400 25-400mW VTX + DVR AIO 720P specs
- Input voltage: 5V;
- Output Power: PIT/25mW/100mW/200mW/400mW Switchable;
- Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ;
- Control Mode: BFOSD Control/ Button, IRC Tramp ready;
- Video Output format: NTSC;
- Record video size: 1280×720 @30FPS;
- TF Card support: Max. 32G;
- Compress Format: AVI;
- Microphone: Yes;
- Antenna: IPEX;
- Mounting hole: 26.5 * 26.5mm;
- Weight: 3.5g without antenna.
- KV : 11000;
- Voltage: 3.7-11.1V;
- Motor Width: 13.6mm;
- Shaft Diameter: 1.5mm;
- Motor Mount Holes: M1.6 on Dia 8.5mm;
- Plug: Micro JST-1.25 3-pins con;
- Battery: 1-3S lipo battery;
- Weight: about 3.2 grams.