Home Downloads Devo F12E User manual

Devo F12E User manual

DevoF12E User Manual

Probably the Devo F12E is the most versatile transmitter that you can buy.  You got everything: 12 channel, telemetry, 5.8Ghz 32 channel live video transmission and 5″ LCD screen.

To explore all the features of this high end remote controller, you must download and read the Walkera DEVO F12E user manual.

Maximum transmiting distance of the Devo F12E can be up to 1.5Km, probably this is the longest fly range that you can reach with a consumer quadcopter.

This transmitter adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features fast reaction and strong anti-jamming protection.

The telemetry function of this transmitter allows to monitor simultaneously three battery voltages and four temperature sensors.

This Walkera Devo F12E FPV transmitter is perfectly combatible with any type of aircraft, from airplanes, helicopter to quadcopters that are using the DEVO-RX1202 receiver module.

Some interesting chapters from the Devo F12E User Manual:

  • Definition of DEVO F12E:  Panel definition, Rear definition, Wiring Diagram and Function keys;
  • Control Stick Adjustments: stick length adjustment and control stick tension adjustment;
  • Training function: Two DEVO F12E transmitters working together can execute the training function to meet the requirements for the beginners;
  • Switches between left-hand and right-hand throttles;
  • Upgrading the DEVO F12E firmware;

The DEVO F12E user manual is split into four separate parts according to your aircraft type.

For someone who can afford a high end quadcopter like the Walkera Scout x4, probably this DEVO F12E will be the best paired first person view transmitter.

Download Walkera DEVO F12E user manual here:


  1. Hi!
    I have been passed a set of Devo F12 E from the previous project group and has been told to work on it.
    Our team tested and the servo responded as it should before we disassemble the wiring from the RX1201 receiver.
    Can i check why my servo is not responding when i transmit a signal from the controller when we install it back again?
    Both the controller and receiver seemed to be in good operational state.
    And my servo is connected to the rudder port.

    Hope you guys can enlighten on this problem.

  2. Hi
    I have new Walkera QR x350 pro and I have problem
    it come with Devo F12E
    If I try watch the video or see fly data I get in to Thottle curve settings
    I turn on the devo and press – that did give me video include flight data . but now it go direct to Throttle Curve settings. How can I fix it ?
    It has the firmware version 1.5
    Where can I find model parameter for QRX 350 pro that include 3d gimbalt + iLook+ turn on off record?

  3. Hello,

    I would like to have some instructions about Devo f12e. I have a problem with sensor view. Speciali with date about altitude (9999,xx) and voltave sensor.
    Could You help me?


    • probably NO, it uses other tx-rx protocol, you must change also the receiver board. I recommend you to contact the Dji guys, before you make any modifications.


Please enter your comment!
Please enter your name here

Exit mobile version