The HBFPV DX40 features a lightweight 92 mm size carbon fiber frame with large ducted blade protectors. The propulsion system is achieved by using four powerful SE0803 brush-less motors with 3-blade propellers. Its highly integrated HBFPV AF412 flight controller comes with integrated 12A ESC.
According to your existing remote controller, you can opt to purchase the HBFPV DX40 drone in a bundle with D16 EU-LBT/NON-EU, DSMX, FlySky FS-RX2A or FrSky D8 radio receiver.
HBFPV DX40 highlights
- 92mm size carbon fiber frame with 40mm whoop style nylon blade protectors;
- Versatile HBFPV AF412 flight controller (BetaFlight OSD and 12A ESC);
- SE0803 type brushless motors with 3-Blade 40mm propellers;
- 5.8G VTX with up to 400mW broadcast power;
- Caddx Baby Turtle camera;
- Optional D16 EU-LBT/NON-EU, DSMX, FlySky FS-RX2A or FrSky D8 radio receiver;
- 2-3S LIPO battery compatible (GNB 2S 550mAh or GNB 3S 450mAh suggested).
HBFPV DX40 main parts specs
HBFPV AF412 flight controller specs
Firmware target: MATEKF411;
IMU: MPU6000 gyroscope/accelerometer (SPI);
OSD: BetaFlight OSD w/ AT7456E chip;
BEC Output: 5V@2A;
Integrated LC Filter;
Included Buzzer pad;
ESC MCU: BB21F16G;
ESC Target: G_H_30;
Continuous current: 12A(13A for 3 seconds);
Input: 2-4S LiPo;
Supports Dshot600, Proshot, Oneshot125, Multishot;
Current meter: 210;
Size: 28.5×28.5 mm (25.5×25.5mm, M2 with damper/M3 mounting holes);
Weight: 4.7 grams.
Motor shaft diameter: 1.0mm;
Motor shaft length: 3mm;
Motor mounting hole: M1.4×3, hole distance 6.6mm;
Plug specifications: JST SH1.25 3-Pin plug;
Motor wire specification: 30AWG silicone wire, wire length 5cm;
Support battery: 2-3s LiPo;
Product weight: 2.45 grams.
FPV transmitter (VTX) specs
Output Power: PIT-mode / 25mW / 100mW / 200mW / 400mW Switchable;
Control Mode: BF OSD Control (RX) / Button (IRC Tramp);
Input Voltage: DC 5V;
Weight: 1.2-1.5 grams.
On-board camera (Caddx Baby Turtle) specifications
Image sensor: 1/2.7 inch -CMOS sensor;
Recording: 1080P/60fps, 1080P/30fps;
Lens: 1.8mm lens;
FPC FOV/Recording FOV: 170;
TV system: NTSC/PAL changeable with OSD;
Video file format: MP4;
Aspect ration: 16:9/4:3 Changeable with OSD;
Max Micro SD card supported: 64G;
Fly OSD: YES;
Power input: 5V-20V;
Power current: 12V/160MA;
Dimension: 14 x 14 mm + 19 x 19 mm;
Net weight: 9 grams.