SPCMAKER Leiteng115 Toothpick FPV drone

SPCMAKER Leiteng115

The SPCMAKER Leiteng115 adopts a similar Toothpick style design as the HGLRC Petrel 120x Pro. It has a wheelbase of 115mm and weighs just 39.8 grams without a battery and radio receiver. You have black or blue protective canopy options.

Its tiny Galloping G1202 11000KV motors are matched with 3-leaf/3-inch propellers. The PCMAKER F4 flight controller comes with an integrated 6A ESC and MatekF411RX firmware. According to your existing transmitter, you can opt for an onboard ELRS or FrSky radio receiver.

SPCMAKER Leiteng115 features

  • 115mm size Toothpick style carbon fiber frame with protective canopy (two-color options);
  • PCMAKER F4 6A AIO Whoop flight controller (1S);
  • Galloping G1202 11000KV brush-less motors;
  • HQProp T 3X2-PC 3-inch propellers;
  • CADDX Nano ANT Lite 1200TVL camera;
  • 5.8g 25/400MW 40CH image transmission (VTX);
  • 1S LIPO compatible (PH2.0 plug 24AWG cable);
  • Optional ELRS or FrSky D16 radio receiver.

Technical specifications

  1. AIO Flight controller
    • MCU: STM32F411
    • Gyroscope: MPU6000
    • Screen display: AT7456E
    • Size: 31.5*31.5mm
    • Mounting hole: 25.5*25.5mm/φ3mm
    • Weight: 3g
    • BEC output: 5V 1.2A
    • FC firmware: MatekF411RX
    • ESC firmware: O_H_5
    • BLHeli BLHeli-S
    • Input voltage: 1S
    • Current: 6A continuous (8A peak)
    • Current scale: 400
  2. Motor specifications
    • Working rated voltage (Lipo): 1S
    • No-load current (4.0V): 1.3A
    • Online current: 5.31A
    • Power limit: 21.24W
    • Internal resistance between phases: 160mΩ
    • Lead specification: 30#AWG 48mm JST1.25
    • Rod: 9N12P
    • Shaft diameter: 1.5mm
    • Size: φ15.5*8.5mm
    • Weight (including wire): 3.6g
  3. Propellers specs
    • Material: PC
    • Length: 3 inches, about 76.2mm (mm)
    • Color: transparent black
    • Quantity: 2 CW & 2 CCW
    • Aperture: 1.5mm
    • Weight: 3.8 grams (4 pieces)
    • Lightweight, strong, and balanced toothpick drone
  4. VTX specs
    • Working voltage: 5V
    • Output power: 25mW/50mW/100mW/200mW/400mW
    • Frequency: 5.8GHz 40CH
    • Video format: NTSC/PAL
    • Ratio mode
    • Support RCDRone OSD
    • Connector: UF.L (IPE-X)
    • Size: 15mmx15mmx3mm (without mounting holes)
    • Mounting hole: 16mmx16mm
    • Weight: 1.5g
  5. Camera specs
    • Image sensor: 1/3″ CMOS sensor
    • Horizontal resolution: 1200 TVL
    • TV system: NTSC and PAL (switchable)
    • Menu: Support
    • Image: 4:3
    • Synchronization: internal
    • Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
    • Signal to noise ratio: >52dB (AGC off)
    • Video output: CVBS
    • Lens: 1.8mm/F2.5
    • Minimum illumination: 0.001Lux
    • Automatic gain control: yes
    • BLC: Yes
    • WDR: Global WDR
    • DNR: 3D DNR
    • Size: 14*14mm
    • Wide power input: DC 3.7-18V
    • Working temperature: -20°C~+60C
    • Working humidity: 20%~80%
    • Weight: 1.7 grams (net weight)

Product images

Protective canopy
Protective canopy
Galloping G1202 KV11000 motors
Motors and props
Battery plug
Battery connector

LEAVE A REPLY

Please enter your comment!
Please enter your name here