Warlark Pro brushless FPV quad

Just another TinyWhoop clone or a more punchy mini FPV drone?

Warlark PRO FPV mini quad

Lately I introduced many mini drones with ducted props, but this Warlark Pro will be the first which features penta-blade propellers. Frankly, I would be curious to test one because till now I was totally disappointed by all props over 3-blades. They are much more noisy.

According to your existing transmitter you can opt between 3 type of radio receivers: A-DSMX/2, B-SFHSS/FRSKY and C-FLYSKY/Hubsan. The RX is integrated into the flight controller and cannot be replaced.

In front of the aircraft is located a 600TVL camera which is paired with 5.8G 25mW VTX.

Compared to other Tiny Whoop alternatives, this Warlark Pro is powered with 2s Li-Po instead of 1s. Higher voltage means more punch but usually also shorter motor life.

The Warlark Pro-85 is available in two colors, blue and red. The included canopy will protect all the electronic parts during crashes.

Warlark Pro features and specs

  • 85mm Wheelbase (rotor to opposite rotor);
  • Ducted propellers (Whoop design);
  • Flight controller with STM32F303CCT6 and optional radio receiver;
  • 1103 brushless motor(KV6400);
  • 4in1 ESC that can reach 4.5A;
  • 5.8G, 25mW, 40CH VTX;
  • 600TVL camera with angle adjustment;
  • Built-in buzzer;
  • Up to 4.5 minutes of flight time.

Warlark PRO color options

Included with the Warlark Pro

  • 330mAh 7.4V Battery;
  • 1set of spare propellers (40mm 5-blade);
  • Battery Velcro tape;
  • Charging harness.

Additionally you will need a battery charger and compatible transmitter (remote controller).

Junior editor on FirstQuadcopter. I'm a drone enthusiast who want to help others to discover their the latest drone news around the world.

LEAVE A REPLY

Please enter your comment!
Please enter your name here