SoloGood FPV Parts: Are they any good, being so cheap?

SoloGood FPV Parts
SoloGood FPV Parts make it not just as easy as possible for you to build your first FPV but also at a low price....

I’ve been testing the ISDT BattAir LIPO for 3 weeks -here’s the pros and cons

ISDT BattAir Smart FPV LIPOs
Last month, I won two pairs of their BattAir smart LIPO batteries on ISDT's giveaway. As they are known more for their hobby chargers,...

KOSPET TANK T3 Ultra review: A near-perfect rugged smartwatch

Kospet T3 Ultra
The last time I wore a watch was in the 80s, a Casio with a built-in scientific calculator that can be considered the great-grandfather...

BLUETTI AC200L review: My fifth Power Station – and the Biggest one!

Bluetti AC200L
Portable power stations like the BLUETTI AC200L are the successor of noisy and heavy gas generators, and they enable off-grid living and working by...

Skystars Koko 2207 1950Kv: Racing and freestyle FPV motor for 5″ drones

SkyStars KOKO 2207 1950KV motors
I received these Koko 2207 motors and a SKYSTARS F722HD flight stack two years ago, but somehow I forgot to review them. The motors...

I tried the Zhiyun Fiveray M40 pocket light — and it’s bright as a Star!

Zhiyun Fiveray M40
The Zhiyun Fiveray M40 pocket LED panel was designed as a lightweight, handheld, and tripod-mountable video light for Vloggers and content creators. The combination...

LN Motor FS3115 900KV: Cinelifter Motors for 9-10″ FPV drones

LN-Motor FS3115 900KV
The FS3115 900KV brushless motors from LN-Motor are intended for 9 and 10 inch cine-lifter FPV drones. These motors can be used in X4...

I’ve been testing the Jumper T14 for 2 weeks – here’s the pros and cons

Jumper T14
The Jumper T14 is the company's third radio controller reviewed here on FirstQuadcotper. The T14 is a mid-level transmitter with a built-in 1W ERLS...

SUNLU 3D Printer Enclosure: An absolutely essential accessory!

Sunlu 3D Enclosure
3D printers are like dust magnets; if you don't cover them with something in a few days, they will be covered by a fine...

RushFPV BLADE F7 AIO: FC for Hassle-free FPV drone building

RushFPV BLADE F7 AIO
RushFPV is known for its easy-to-use, solder-free flight controllers. This review will examine their latest BLADE F7 45A AIO flight module with a built-in...

RadioMaster Bandit ExpressLRS: 915MHz ELRS RX and TX

RadioMaster Bandit series (TX and RX)
After testing so much 2.4GHZ ELRS hardware, I thought it was time to review some 915MHz equipment too. RadioMaster's Bandit series includes three TX...