#AD
Home Accessories Remote controller / Transmiiter

Remote controller / Transmiiter

In this category you will find from basic Remote Controllers (Transmitters) to professional ones.

Transmitters are used for wide range of RC products. From cars, boats, airplanes to drones.

RC Controllers can be categorized by radio protocols, number of channels, modes, frequency and other many other features.

Remote controllers and transmitters for quadcopter drones

The control range is highly depended by the broadcast power of the remote controller.

FPV remote controllers are suitable to display the drone’s live video feed.

FrSky TANDEM X18S transmitter with EthOS

FrSky TANDEM X18S
Priced for more than $500, the FrSky TANDEM X18S is for sure not intended for everyday FPV drone pilots. I have to admit that it has a UFO design and versatile hardware, but still super expensive for a remote controller! The FrSky compatible Tandem X18 series dual-band telemetry radios benefit from an enhanced ergonomic design with rounded and more comfortable...

GEPRC TinyRadio ELRS Remote Controller

GEPRC TinyRadio ELRS
The beauty of ExpressLRS is that is open-source and can be used for free by any remote controller manufacturer. The GEPRC TinyRadio ELRS is not the first of its kind and probably not the last too. It comes in both frequency options (2.4GHz or 915Mhz) and mode 1 or mode 2 stick configuration. To ensure a low-latency communication between the...

JumperRC T-Lite V2 drone transmitter: What’s New?

JumperRC T-Lite V2
JumperRC is launching an updated version of their popular T-Lite transmitter that has two built-in radio receiver options: a 4-in-1 multiprotocol module or an ELRS module. The most significant upgrade of the Jumper T-Lite V2 is the capability to run an external radio module at full power without needing any modifications, unlike the original T-Lite (V1). It comes with an...

FIMI TX10 remote controller with built-in screen

FIMI TX10
Together with the FIMI X8 2022, the company introduced an optional smart controller with a built-in screen. Now, 7 months later they truly revealed the TX10, and at first sight, it looks good! The FIMI TX10 has an ergonomic design, a 5.5" high-brightness 1080P LCD screen, HDMI out, and an Android operating system. The TX10 features 3rd generation low-latency RokLink...

LiteRadio 3 Pro drone transmitter with two radio options

LiteRadio 3 Pro
BetaFPV's transmitter family gets a new member with a significant improvement. Now, the LiteRadio 3 Pro comes with a 1.3-inch OLED screen that makes the configuration part easier. Instead of tones of buttons, the display module features two tiny 5D joysticks. The BetaFPV LiteRadio 3 Pro comes with two built-in radio options. While the ELRS edition can be configured with...

RadioMaster Zorro review – Conquer the Sky!

RadioMaster Zorro
From my point of view, the selling point of the RadioMaster Zorro transmitter is its big screen. When you are over 40 years old, you are losing the focusing ability for near vision and due to that, the lens inside your eye becomes less flexible. My actual radio controller has a small LCD that makes the configuration part quite...

BETAFPV LiteRadio 3 review: New Year, New transmitter

BetaFPV LiteRadio 3 review
BetaFPV's third-generation radio transmitter, the LiteRadio 3, comes with a few cool upgrades, including new nano gimbals, neck strap hook, extended working time, and updated shoulder switches. In addition to the inbuilt TX module (ELRS or FrSky) now has an external Nano TX bay on the back for future protocols. A radio transmitter should be one of the very first...

iFlight Commando 8 ELRS radio transmitter

iFlight Commando 8
The upcoming iFlight Commando 8 radio transmitter follows a similar gamepad style design as the Jumper T-Pro and RadioMaster Zorro. According to the rumored specs, it features an integrated high-performance ELRS radio module and a 4.000mAh battery that allows 24 hours continuous usage. While the 915MHz version has up to 1W power, the 2.4GHz only 500mW. On the back of...

BetaFPV LiteRadio 3 Radio Transmitter (ELRS/FrSky)

BetaFPV LiteRadio 3
BetaFPV's third-generation LiteRadio 3 comes with two radio options (CC2500/FrSky or SX1280/ELRS) and a Nano TX extension bay. It also adopts a similar gamepad style design as its predecessors. The BetaFPV LiteRadio 3 is powered by an inbuilt 2000mAh battery that allows about 15 hours of working time. When the battery is near empty a blue LED will flash reminding...

RadioMaster Zorro: First ELRS enabled transmitter

RadioMaster Zorro
The upcoming RadioMaster Zorro follows a similar gamepad style design as the Jumper T-Pro, but with a much bigger status screen and replaceable rubber grips. The Zorro radio series was announced with four types of built-in TX modules: CC2500, 4in1, ELRS, or CC2500+TBS Nano. On the front panel, it has two adjustable hall gimbals, a metal roller, and 6 control...

Coming soon: Jumper T-Pro drone remote controller

Jumper T-Pro
Jumper-RC is about to release a new gamepad-style drone transmitter named T-Pro. In the teaser photos, you can see that its design is clearly inspired by TBS Tango 2 controller. In addition to the built-in 4-in-1 transmission module, the Jumper T-Pro has an ELRS Nano / TBS CRSF Nano compatible module extension bay on the back. It will be natively...