Eachine TX16S transmitter (RadioMaster TX16S clone)
From the first rumored images was obvious that the Eachine TX16S is a RadioMaster TX16S clone. I adopt an almost identical design and a similar set of features. Both run OpenTX firmware, has 16CH transmission channels, and are equipped with pro-grade Hall Sensor Gimbals.
The Eachine TX16S remote controller is powered by two pieces of 18650 batteries. You can also...
RadioMaster Zorro review – Conquer the Sky!
From my point of view, the selling point of the RadioMaster Zorro transmitter is its big screen. When you are over 40 years old, you are losing the focusing ability for near vision and due to that, the lens inside your eye becomes less flexible. My actual radio controller has a small LCD that makes the configuration part quite...
Jumper T8SG Plus transmitter: Rumored specs and features
Following the success of the T8SG transmitter, Jumper announced an upgraded version called T8SG Plus. In addition to the open-source software and adjustable transmission power, the Jumper VT8SG V2.0 Plus comes with a nice gold finish design.
Similar to other professional remote controllers, the upgraded "Plus" edition comes with 6 shoulder switches, instead of only 4 like the first model...
FLYSKY Paladin PL18: Pro grade drone transmitter
The FLYSKY Paladin EV PL18 is a professional-grade transmitter dedicated to all kinds of remote-controlled machines. For the first time, fixed-wing, gliders, helicopters, FPV, multi-copters, and construction vehicles are all supported in one radio.
Its new 5D high-precision hall gimbals are easy to set up for or right-handed users and feature adjustable spring tension, as well as adjustments for dampening...
LiteRadio 3 Pro drone transmitter with two radio options
BetaFPV's transmitter family gets a new member with a significant improvement. Now, the LiteRadio 3 Pro comes with a 1.3-inch OLED screen that makes the configuration part easier. Instead of tones of buttons, the display module features two tiny 5D joysticks.
The BetaFPV LiteRadio 3 Pro comes with two built-in radio options. While the ELRS edition can be configured with...
FrSky Taranis X-LITE transmitter: First rumors (Features and specs)
Surely, FrSky radios have not become so popular because they are affordable. The new Taranis X, even if it is called "Lite", is advertised for more than 200 bucks. I have to admit that, after I reviewed the Taranis Q X7, due to its excellent build quality and compatibility with lots of my FPV drones, I became their fan too...
Skydroid H12 FPV transmitter (5-30KM range)
Similar to FLYSKY Paladin PL18, the Skydroid H12 transmitter is designed for industrial RC machines such as agricultural drones. It comes with a large, 5.5" Full HD (1920x1080) screen and a high-capacity battery. According to the advertised specs, the built-in 10000mAh battery allows up to 20hours of continuous usage.
The Skydroid radio ecosystem includes the H12 transmitter, R12 radio receiver,...
FIMI TX10 remote controller with built-in screen
Together with the FIMI X8 2022, the company introduced an optional smart controller with a built-in screen. Now, 7 months later they truly revealed the TX10, and at first sight, it looks good!
The FIMI TX10 has an ergonomic design, a 5.5" high-brightness 1080P LCD screen, HDMI out, and an Android operating system. The TX10 features 3rd generation low-latency RokLink...
Flysky FS-NV14 Nirvana: Transmitter with Alien Technology :D
Flysky's new FS-NV14 Nirvana remote controller looks like Alien Technology. It features pretty cool design, OPEN-TX firmware, up to 14 control channels and 3.5" LCD screen with touch function.
Just like the Taranis X-LITE, the FS-NV14 Nirvana also adopts gamepad alike design. It has total of 6 shoulder switches, 3 on each side of the remote (2 on front, 1 on rear)....
LDARC EX8 transmitter: S-FHSS D16EU & D16 Non EU
The LDARC EX8 transmitter adopts a similar game-pad style design as the popular Jumper T-Lite. As its name says, it can be configured with up to 8 channels and supports FrSky S-FHSS D16EU and D16 Non-EU radio receivers.
In addition to the two joysticks, on the front panel, it has a 128x64 status LCD and a cool RGB dial button....
JumperRC T-Lite V2 drone transmitter: What’s New?
JumperRC is launching an updated version of their popular T-Lite transmitter that has two built-in radio receiver options: a 4-in-1 multiprotocol module or an ELRS module.
The most significant upgrade of the Jumper T-Lite V2 is the capability to run an external radio module at full power without needing any modifications, unlike the original T-Lite (V1). It comes with an...