FrSky Tandem X20HD: The Ultimate Drone Transmitter

First radio controller with built-in HDZero compatible FPV screen

FrSky Tandem X20HD

FrSky’s high-end X20 transmitter series has 3 versions: Standard, S and HD. The X20HD has a built-in integrated FPV screen (800×600) supporting 720p@60FPS video quality, removing the need for a standalone FPV screen. When combining the HD 720p 60FPS video with near 0ms low latency digital video transmission technology, the X20 HD radio will provide more enjoyment and confidence when FPV flying tours. The built-in video receiver module is compatible with all HDZero video transceiver (VTX) products. Before purchasing, make sure you choose carefully between FCC (US) and LBT (EU) because the internal antennas are optimized to be used in these regions.

The FrSky Tandem X20HD radio package includes a 5.8G antenna kit. The circularly polarized directional antennas ensure that the radio receives optimum video transmission signals, even in complex RF environments. The HD edition of the X20 radio also provides an HDMI output which can be used to easily transfer the HD video to an external monitor or device if required, this provides a great solution if you wish to use your existing FPV
goggles which support HDMI-in, removing the need for a separate HDZero video receiver attached to your goggles. Before purchasing, make sure you choose carefully between FCC (US) and LBT (EU) because the internal antennas are optimized to be used in these regions.

#AD

The Tandem X20HD radio measures 213x200x95 mm and weighs about 830 grams without a battery. It comes with the ETHOS operating system and supports up to 24 individual channels. With the right radio receiver, you can obtain a range of up to 100KM and down to 4ms end-to-end latency.

Key Features

  • Built-in near 0ms latency HD digital video transmission system (720P 60FPS)
  • Supports working with HDZero VTX Race V2 / Whoop / Freestyle, etc.
  • Supports HDMI Output (Micro type interface)
  • 5.8G circularly polarized directional external antennas
  • Built-in TD 900M/2.4G Dual-Band Internal RF Module
  • Supports Multiple Working Modes
    • 2.4G ACCST D16 Mode (Compatible with ACCST Receivers with D16 V2 or later FW)
    • 2.4G ACCESS Mode (Compatible with ACCESS Receivers)
    • 900M ACCESS Mode (Compatible with ACCESS R9 868/915MHz Receivers)
    • 2.4G&900M TD Mode (Compatible with TD Receivers)
  • Super-low latency and long-range control with telemetry
  • Up to 50 to 100KM range and down to 4ms end-to-end latency
  • 800*480 Color Touch-Screen Displays
  • 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
  • Lite Type External Module Bay
  • Built-in 6-axis Gyroscope Sensor
  • All CNC Metal Trim Knobs
  • Haptic Vibration Alerts and Voice Speech Outputs
  • Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface)
  • High-speed PARA Wireless Training System (Compatible with FreeLink App3.0)
  • High-Precision Hall-Sensor Gimbals with All-CNC Metal Panel
  • ETHOS: The more powerful, Flexible and Intuitive OS for your radio.
  • Clear and Intuitive UI Design
  • Supports Dual Operation Modes of Radio Display (Touch and Non-Touch)
  • Supports Multi-Language Switching
  • Hardware/Software Version and Factory Version Detection
  • Supports running LUA Scripts

Tehnical specifications

  • Operating system: ETHOS
  • Internal RF module: TANDEM
  • Number of Channels: 24 channels
  • Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
  • Operating Temperature: -10℃~60℃ (14℉~140℉)
  • USB Adaptor Voltage: 5V+0.2V
  • USB Adaptor Current: >2.0A
  • Backlit touchable LCD resolution: 800*480
  • Resolution & Frame Rate of HD VTX: 720P 60FPS
  • Compatibility: ACCST D16 & ACCESS & TD series receivers
  • Dimension: 213x200x95 mm (L*W*H)
  • Weight: 833g (without battery)

LEAVE A REPLY

Please enter your comment!
Please enter your name here

15 − thirteen =