Remote controller / Transmiiter

In this category you will find from basic Remote Controllers (Transmitters) to professional ones.

Transmitters are used for wide range of RC products. From cars, boats, airplanes to drones.

RC Controllers can be categorized by radio protocols, number of channels, modes, frequency and other many other features.

Remote controllers and transmitters for quadcopter drones

The control range is highly depended by the broadcast power of the remote controller.

FPV remote controllers are suitable to display the drone’s live video feed.

Eachine TX16S transmitter (RadioMaster TX16S clone)

Photo of Eachine TX16S remote controller
From the first rumored images was obvious that the Eachine TX16S is a RadioMaster TX16S clone. I adopt an almost identical design and a similar set of features. Both run OpenTX firmware, has 16CH transmission channels, and are equipped with pro-grade Hall Sensor Gimbals. The Eachine TX16S remote controller is powered by two pieces of 18650 batteries. You can also...

iFlight iF8 multi-protocol FPV drone controller

Photo of iFlight iF8 remote controller
Similar to the Jumper T-Lite, the iFlight iF8 also adopts the CC2500 Multi-protocol RF chip. The remote controller is compatible with both, US and Europe RF regulations. Following the included instructions you toggle between FCC and LBT modes. The front panel is very clean, besides the two control sticks and power switch, there are only 5 status LEDs. It has...

Jumper T-Lite review – Is It Worth The Money?

Jumper T-Lite review
First rumors about Jumper T-Lite transmitter appeared in December 2020. The FPV community has long wanted such a compact and versatile drone controller. Our Jumper T-Lite review covers unboxing, controls, compatibility, user experience, and rivals. In addition to the cool gamepad style design, T-Lite's beauty is that it runs OpenTX firmware, which is the most popular operating system for radios....

RadioMaster T8 and T8 Pro transmitters

Photo of RadioMaster T8 Pro and T8 remote controllers
Similar to the Jumper T-Lite, the new RadioMaster T8 transmitter also features a game-controller style design and it is available with two types of RF modules. While the T8 Pro comes with CC2500 Multi-Protocol module and HALL Sensor gimbals, the cheaper T8 Lite with FrSky compatible single-chip RF module and potentiometer sensor gimbals. Another difference between these two remote...

BETAFPV LiteRadio 2: One of the cheapest FrSky transmitter

Photo of BETAFPV LiteRadio 2 remote controller
Price for only $50, the BETAFPV LiteRadio 2 is currently the most affordable FrSky compatible 8 channel drone transmitter. It features a similar game controller style design to the Jumper T-Lite. It is available in white and black colors, with a mode2 stick assignment (throttle on left). The front panel of the BETAFPV LiteRadio 2 remote controller is very clean...

Jumper T-Lite: Gamepad style 16CH drone transmitter

Photo of Jumper T-Lite remote controller
The new Jumper T-Lite 16CH transmitter adopts a similar game controller style to the remote controller packed with the DJI FPV drone. The T-Lite comes with two types of built-in radio modules (CC2500/JP4IN1), Hall Sensor Gimbals, and OpenTX firmware. Instead of an integrated rechargeable LIPO, or standard AA batteries, Jumper opted to power the T-Lite transmitter with a single 18650...

Jumper T16 Pro Hall V2: One transmitter for all your drones

Jumper T16 Pro Hall V2 remote controller
The Jumper T16 Pro V2 with hall gimbals is a high-performance transmitter (TX) with a bright 4.3″ display. The T16 Pro HALL V2 is compatible with TBS Crossfire modules and runs on OPENTX firmware. Its internal JP4IN1 module is compatible with most common radio protocols. On the front panel, besides the half sensor gimbals, there are 6 trim-switches, 4 switches...

TBS Tango 2 Pro: Transmitter for all RC enthusiasts

TBS Tango 2 PRO remote controller
The first TBS Tango 2 Pro reviews say that is the transmitter for which every RC enthusiast is waiting for. While it is super compact and lightweight, it comes with a built-in TBS Crossfire TX module and full-size gimbals. At first sight, the only “downgrade” from the first generation Tango RC is the lack of the FPV screen. Instead...

Coming soon: Flysky FS-FT18 Paladin Transmitter

Flysky FS-FT18 Paladin transmitter
2019 comes with a new FlySky transmitter called FS-FT18 Paladin. As its name says it, will feature up to 18 channels. But why so many channels? Does anybody use them? Let's be fair, drone pilots will never need more than 6~8 or max 10 channels. The Flysky FS-FT18 was announced in mode 1 and mode 2 variants. On top of...

WFLY T18 transmitter: Android OS & 7″ FPV screen

WFLY T18 remote controller
If you read our PNP, BNF, ARF, RTF comparison, you probably already knows that only RTF package includes a remote controller. In case of the rest, you will need to use your own transmitter. Featuring up to 18 channels, built-in W.Bus and PPM transmitters, the WFLY T18 can be used with many BNF and PNP drones. Furthermore, thanks to the...

Flysky FS-NV14 Nirvana: Transmitter with Alien Technology :D

Flysky FS-NV14 Nirvana remote controller
Flysky's new FS-NV14 Nirvana remote controller looks like Alien Technology. It features pretty cool design, OPEN-TX firmware, up to 14 control channels and 3.5" LCD screen with touch function. Just like the Taranis X-LITE, the FS-NV14 Nirvana also adopts gamepad alike design. It has total of 6 shoulder switches, 3 on each side of the remote (2 on front, 1 on rear)....