Caddx Turbo Micro SDR2 Plus: Freestyle & Race

Caddx Turbo Micro SDR2 Plus Freestyle & Racing

Caddx has announced an upgraded version of their SDR FPV camera series, called Caddx Turbo Micro SDR2 Plus. The new SDR2 Plus series comes in two variants: Freestyle and Race. Both versions will be available in three army texture colors: Red, Yellow and Khaki.

Featuring high quality Sony STARVIS image sensor and Turbo Eye Lens with the F1.8 focal length, both cameras offer up to 0.0001 Lux light sensitivity. Through the OSD menu, you can freely switch between PAL and NTSC video standards, as well as between 4:3 and 16:9 video formats.

#AD: Banggood drone sales

Caddx Turbo Micro SDR2 Plus Freestyle vs Caddx Turbo Micro SDR2 Plus Race

As you can see in the comparison table bellow, the biggest difference between the Freestyle and Race editions is the video resolution. While the SDR2 Plus Freestyle has 1200TVL, the SDR2 Plus Racing has only 1000TVL. Contrary to its larger size, the Freestyle version is lighter than the Race edition. Caddx claims that their racing drone optimized FPV camera features extremely low latency and zero jello effect.

Specs/Model Caddx Turbo SDR2 Plus Freestyle Caddx Turbo SDR2 Plus Race
Image sensor 1/2.8″ SONY Exmor-R STARVIS SONY STARVIS sensor
Horizontal resolution 1200TVL 1000TVL
TV System PAL & NTSC PAL & NTSC
Image format 4/3 and 16/9 4/3 and 16/9
Wide dynamic range Super WDR (Double Scan) Super WDR (Double Scan)
Min. Illumination 0.0001Lux@F1.8 (Starlight) 0.0001Lux@F1.8 (Starlight)
Lens Full Size Turbo Eye Lens Full Size Turbo Eye Lens
Electronic Shutter PAL: 1/50~100,000; NTSC: 1/60~100,000 PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio >60dB (AGC OFF) >60dB (AGC OFF)
Camera OSD ADVANCE MENU Voltage/time/horizontal line/title
DNR 3-DNR 3-DNR
Dimensions 19 x 19 x 19mm 19 x 19 x 17mm
Weight 5.5g 6.4g
Other High resolution No jello, Extremely low latency

Caddx Turbo Micro SDR2 Plus camera design

Included accessories with the Caddx Turbo Micro SDR2 Plus cameras

  • Aluminum bracket;
  • 5D-OSD control board;
  • 4pin FPV silicone cable type A (with OSD plug);
  • FPV silicone cable type B (2-pin port for both side);
  • Internal hexagonal wrench;
  • Screws set.

1 COMMENT

LEAVE A REPLY

Please enter your comment!
Please enter your name here