The iFlight Chimera7 Pro V2 is probably the first 7-inch long-range FPV drone with a DJI O3 Air Unit onboard. According to your existing transmitter, you can opt for BNF-DJI, ELRS 2.4Ghz, or TBS Crossfire Nano RX radio receivers.
With the DJI O3 Air Unit range hack, you can expect a range of up to 10KM if your battery lasts that much :)
Designed for long-range flights, the Chimera7 Pro V2 comes with a pre-installed GPS module. This will let you know the exact position, speed, and flight of the drone, but it also can be configured with a fail-safe return to home in case of RC signal loss.
The iFlight Chimera7 Pro V2 is based on a BLITZ F722 flight stack with 55A ESC and XING2 2809 motors. It can be powered with 5S and 6S batteries. For optimal performance, 6s/3000mAh is recommended.
- Smooth and Powerful XING2 Motors: The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash-resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.
- Latest Chimera7 Pro Kit Frame for Maximum Protection: The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.
- DJI O3 HD Air Unit Low-Latency Digital Transmission: Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference.
- 4K Stabilized Video with 155° Ultra-Wide Angle: Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats.
- Secured Battery Plug with Anti-Spark Filter: Plugging in a battery can create a loud spark at the connector, which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes, which can protect your electronics from damage.
- Specially Designed Heatsink for DJI O3 HD Air Unit: Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.
- GPS Pre-Installed for More Safety at A Distance: GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.
|Take-off weight||About 750 grams with a battery|
|Flight stack||BLITZ F722 FC + BLITZ E55 4-IN-1 2-6S 55A ESC|
|Motors||XING2 2809 motors|
|GNSS||GPS + Galileo|
|Radio options||DJI BND, ExpressLRS, or TBS Crossfire Nano RX|