iFlight ProTek60 Pro Cinelifter HD FPV drone

iFlight ProTek60 Pro HD

The iFlight ProTek60 Pro is a professional FPV drone specially designed for Komodo, Zcam, BMPCC 6K, GH5, Red, and other cinema cameras. It’s 282mm size carbon fiber frame has Whoop-style blade protectors for safer flights.

Thanks to the powerful propulsion system (XING2 310 motors + 6″ props + 80A), the iFlight ProTek 60 Pro drone can take a 1.5 kg payload (up to 3.5kg take-off weight) and has a top speed of 110 km/h (68mph). Battery life is about 3-6 minutes according to the payload and flight style.

#AD

The onboard iFlight M8Q-5883-GPS & Compass modules allow a failsafe return to home in case of RC signal loss.

iFlight ProTek60 Pro HD features

  • 282mm size carbon fiber frame with Whoop style blade protectors;
  • Support a variety of camera mounting holes, such as Komodo/Zcam/BMPCC 6K/GH5 or similar cameras;
  • Brand new electronic control design, 50% redundancy, safe and reliable;
  • Install high-precision GPS;
  • The maximum take-off weight is 2KG, the maximum speed can reach 110Km/H, and the flight time is about 3-6 minutes;
  • Rugged landing gear design, a variety of camera side panel installation kits;
  • Quick-release battery installation structure, center of gravity, stable flight;
  • Fully enclosed fuselage protection;
  • BLITZ Mini F7 flight controller;
  • SucceX X80A ESC board;
  • XING2 310 brushless motors with HQ 6*4*3 propellers;
  • iFlight M8Q-5883-GPS & Compass V2.0 module;
  • 6S LIPO battery compatible (Fullsend 6S 4400mAh recommended).

Technical specifications

iFlight ProTek60 Pro with BMPCC-6K Camera

Flight controller specs

  • MCU: STM32 F722
  • Gyro: MPU6000
  • Baro: NO
  • OSD: AT7456E
  • BEC:5V 2.5A
  • BlackBox:32MB
  • UARTs: 6
  • SmartAudio / IRC Tramp VTX protocol supported
  • WS2812ledStrip: Yes
  • Bepper: Yes
  • Firmware Target: IFRC-IFLIGHT_BLITZ_F722
  • Mounting pattern: 30.5*30.5mm/φ4
  • Dimensions: 36.5*35mm
  • Weight: 7.8g

iFlight ESC Commander PCB (4x SucceX X80A) specs

  • MCU: G071
  • Capacitance per ESC: total 240UF Low ESR
  • Current Sensor: Yes
  • Input: 2-8S LIPO
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM Drive
  • Firmware Target: iFlight-BL32-PRO
  • Dimension: 40*17mm
  • Weight:8.1g.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

twenty − seven =