Coming soon: Skystars StarLord GK7 FPV drone

Skystars StarLord GK7

With 297mm wheelbase, GPS and up to 800mW VTX, the Skystars StarLord GK7 drone is designed for long range FPV flights. The Skystars ST2306 motors are paired with 7″ propellers. Instead of a 4-in-1 ESC board, the manufacturer opted for 4 individual 40A rated ESC modules.

In addition to the on-board Caddx.us Ratel FPV camera, you can install a second GoPro alike DVR camera.

Sponosored AD

The StarLord GK7 quadcopter is available in two versions, with and without GPS module. Both variants can be ordered with FrSky R-XSR, R9MM or XM+ radio receiver.

Skystars StarLord GK7 highlights

  • 297mm size StarLord GK7 carbon fiber frame kit;
  • TurboS F4 AIO OSD BEC V2.0 flight controller;
  • Talon32 Slim40A BLheli_32 ESC;
  • Skystars ST2306 1750KV brushless motor;
  • DALProp 7045 3-Blade propellers;
  • Caddx.us Ratel 1200TVL camera;
  • 5.8G/40CH VTX (25/200/500/800mW output power);
  • 3-6S 1500-2600mAh Lipo Battery suggested.

StarLord GK7 Skystars main parts

Skystars StarLord GK7 main parts

StarLord GK7 Frame Kit

  • Wheelbase: 297mm;
  • Bottom plate thickness: 2mm;
  • Top Plate Thickness: 2mm;
  • Top and bottom plate spacing: 25mm (aluminum column height 25mm);
  • FC Pattern: 20*20 and 30*30mm;
  • FPV Camera Spacing: 19mm;
  • Screws: YFS 12.9 class screw.

TurboS F4 AIO OSD BEC V2.0 Flight Controller

  • F4 Flight Control Board (D-Shot Version);
  • Brand Name: Skystars;
  • Model: TurboS;
  • MPU: 6000;
  • CPU: STM32F405RGT6;
  • Input Voltage: 2-6S Lipo;
  • Built-in Betaflight OSD to adjust PID;
  • BEC Output: 5V@3A;
  • Support Subs/PPM/DSMX receiver;
  • Size: 30.5 x 30.5mm board;
  • Weight: 6 grams.

Talon32 Slim40A BLheli_32 ESC

  • Input Voltage: 3-6S Lipo battery;
  • Constant Current: 40A;
  • Peak Current: 50A;
  • BEC Ouput: NO;
  • Firmware: BLheli32-F3;
  • MOS Tube: TOP QUALITY MOSFET;
  • Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200,;
  • With F3 MCU main chip, 50% faster than normal 32bits ESC;
  • BLheli_32 firmware, support oneshot, multishot, Dshot;
  • On-board RGB LED ( WS2812 LED);
  • CNC Protective case, improved heat dissipation effect and protect ESC as well;
  • Dimensions: 9 x 37.5 x 5.8mm;
  • Weight: 6.8 grams.

LEAVE A REPLY

Please enter your comment!
Please enter your name here