CYCLONE Nano 2400RX ExpressLRS radio receiver
The CYCLONE Nano2400RX ELRS receiver has a power amplifier (PA+LNA), so it has a 100mW telemetry output and better sensitivity at longer distances. It adopts the IPEX1 generation antenna base and cooperates with an external dipole T-type antenna.
The Nano 2400RX module measures just 11x18x3mm and weighs only 3 grams. It features an IPEX1 antenna plug and comes with a...
FrSky Tandem X20HD: The Ultimate Drone Transmitter
FrSky's high-end X20 transmitter series has 3 versions: Standard, S and HD. The X20HD has a built-in integrated FPV screen (800x600) supporting 720p@60FPS video quality, removing the need for a standalone FPV screen. When combining the HD 720p 60FPS video with near 0ms low latency digital video transmission technology, the X20 HD radio will provide more enjoyment and confidence...
Runcam Thumb Pro: 16gram 4K drone camera
RunCam, one of the most popular drone camera manufacturers, announced their new Thumb Pro camera weighing only 16 grams and comes with UHD recording. The Runcam Thumb Pro is suitable for almost any size of CineWhoop and other kinds of FPV drones. It can record 4K@30fps or 2.7K@60fps videos (up to 60mbps).
As it is intended to be installed on...
ELEGOO NEPTUNE 3: Features, Specs & price
The new ELEGOO NEPTUNE 3 provides all the available features in a low-budget FDM 3D printer. Since it is designed for beginners, it is easy to assemble, and everything is included for a quick start. With its 220*220*280mm build volume and a price of just $210, the third-generation Neptun can compete with most filament 3D printers in its market...
RunCam Link Falcon Nano Kit: Native 1080P@120FPS
RunCam was the second third-party manufacturer that started to produce DJI HD Digital video transmission compatible devices. The RunCam Link Falcon Nano kit consists of two main parts: a Digital video transmitter (Link) and an FPV camera (Falcon Nano).
The new shrunk Falcon Nano camera has a size of just 16*14*17mm allowing it to be used on small FPV drones....
RadioMaster ELRS EP1 & EP2 Nano RX radio receivers
A few months ago, RadioMaster introduced two ExpressLRS-compatible radio receivers with their Zorro transmitter. This review will look more closely at the RadioMaster ELRS EP1 and EP2 Nano RX ELRS radio receivers.
ExpressLRS is a relatively new radio protocol that is focused on range and latency. Regarding remote drone operation, these are the two most important factors besides reliability. Being...
FrSky TANDEM X18S transmitter with EthOS
Priced for more than $500, the FrSky TANDEM X18S is for sure not intended for everyday FPV drone pilots. I have to admit that it has a UFO design and versatile hardware, but still super expensive for a remote controller!
The FrSky compatible Tandem X18 series dual-band telemetry radios benefit from an enhanced ergonomic design with rounded and more comfortable...
GEPRC TinyRadio ELRS Remote Controller
The beauty of ExpressLRS is that is open-source and can be used for free by any remote controller manufacturer. The GEPRC TinyRadio ELRS is not the first of its kind and probably not the last too. It comes in both frequency options (2.4GHz or 915Mhz) and mode 1 or mode 2 stick configuration.
To ensure a low-latency communication between the...
JumperRC T-Lite V2 drone transmitter: What’s New?
JumperRC is launching an updated version of their popular T-Lite transmitter that has two built-in radio receiver options: a 4-in-1 multiprotocol module or an ELRS module.
The most significant upgrade of the Jumper T-Lite V2 is the capability to run an external radio module at full power without needing any modifications, unlike the original T-Lite (V1). It comes with an...
DJI RS3 and RS3 Pro DSLR cinema gimbals
It looks like 15th June become the official 'Gimbal Day'. Besides Zhiyun, DJI also announced two new Ronin DSLR cinema gimbals. While the DJI RS 3 can support up to 6.6 lbs (3 kg), the RS 3 Pro can support up to 10 lbs (4.5 kg). In order to accommodate larger cameras, the RS3 Pro also has longer arms...
ZHIYUN WEEBILL 3 DSLR Gimbal
ZHIYUN, the favourite gimbal brand of professional filmmakers, has officially revealed the WEEBILL 3, its portable, high-performance gimbal for DSLR cameras. It adopts a new SLING 2.0 design for improved ergonomics, a built-in microphone, fill light and a powerful, inbuilt battery supporting all-day use. The WEEBILL 3 gimbal upgrades the filmmaking and photography experience by giving a dynamic, lightweight...