FlyFox Nano3: Ultra-Light Long Range FPV drone

Like all great concepts, the Rekon 3 Nano‘s design was quickly replicated. The FlyFox Nano3 looks almost identical and also uses as a power source a single 18650 LI-ION battery that allows about 15 minutes of flight time. As its name says, it is equipped with 3″ propellers.

Advertised for long-range FPV flights, it comes with a high-power 5.8GHz VTX. The broadcast power of the PandaRC VT5804 Nano FPV transmitter can be toggled between 25, 50, 100, 200, and 400mW. The onboard Runcam Racer Nano 2 has excellent image quality and a good response to light-level changes.

FlyFox Nano3 core features

• Ultra-Light design – just 102 grams (similar to Rekon 3 Nano);
• SPCMaker F411 AIO flight controller with integrated 6A ESC;
• RCINPower 1202 Plus 11500KV motor with Gemfan 3018 propeller;
• PandaRC VT5804 Nano 400mW VTX;
• Runcam Racer Nano 2 1000TVL FPV Camera;
• Powered by a single 18650 LI-ION battery (about 15min flight time).

Technical specs

SPCMaker F411 R66 flight controller specs

• MCU: STM32F411;
• Gyro: MPU6000;
• OSD: AT7456E;
• Firmware: MatekF411RX;
• Size: 31.5×31.5mm;
• Mounting Hole: 25.5×25.5mm (M3);
• Weight: 2.8g;
• Input Voltage: 1S;
• Con. Current: 6A;
• Burst Current: 8A BEC;
• Output: 5V 1.2A;
• ESC Firmware: O_H_5;
• BLHeli: BLHeli_S;
• Current Scale: 400.

PandaRC VT5804 Nano specs

• Operating Voltage : +5V;
• Output power: 0/25/50/ 100 /200/400mW;
• Frequency: 5.8GHz 40CH;
• Weight : 1.5g;
• Dimension: 15mmx15mmx3mm(without mounting hole);
• Mounting hole: 16mmx16mm;
• Video format : NTSC/PAL;
• Pit Mode;
• Support OSD for RC Drone.

RCINPower 1202 Plus motor specs

• KV: 11500;
• Voltage: 1S;
• Mounting: 9x9mm, M2;
• 1.5mm prop shaft.