Coming soon: GEPRC Thinking P16 HD FPV drone

GEPRC Thinking P16 HD

The new GEPRC Thinking P16 HD micro FPV drone features on-board Caddx Vista Nebula camera kit. This super-compact digital video transmission system is compatible with DJI’s FPV goggles. Despite its small size (only 79 mm wheelbase), it’s powered by a 3S battery. GEPRC claims that due to the ultra-high efficient propulsion-system (GR1103 motors + GEMFAN 1636 propellers) and lightweight design, with a 300mAh pack you can have up to 4 minutes of flight time.

The brain of this tiny CineWhoop is the GEP-12A-F4 AIO flight controller with an integrated 12A speed controller. According to your existing transmitter, you can opt from a wide range of external radio receivers (FlySky, FrSky, and TBS compatible). Of course, BNF package is natively compatible with DJI FPV remote controllers.

Features and specs

  • 79mm size frame with protective canopy and duct blade protectors;
  • DJI digital FPV compatible;
  • GEP-12A-F4 AIO flight controller;
  • Integrated 4 x 12A BLHeli_S (Dshot/Multishot/OneShot);
  • BetaFlight OSD w/ AT7456E chip;
  • Caddx Vista Nebula camera kit;
  • GR1103 8000KV brushless motors witb 1.6″ GEMFAN 1636 propellers;
  • 5.8GHz (48 Channel) w/ VTX telemetry (IRC Tramp) and adjustable broadcast power (PIT/25/100/200mW);
  • Optional radio receiver (FlySky FS-A8S V2, FrSky R-XSR, XM+ or TBS Crossfire Nano RX);
  • 3S LIPO battery compatible (300mah suggested).

GEPRC Thinking P16 main parts technical specifications

GEPRC Thinking P16 HD main parts parameters

GEP-12A-F4 flight controller specs

  • MCU: STM32F411;
  • Gyro:MPU6000;
  • OSD:BetaFlight OSD w/ AT7456E chip;
  • Firmware target: GEPRCF411;
  • Integrated 12A ESC (BLHeli_S – Dshot/Multishot/OneShot protocols).

GR1103 motor specs

  • KV: 8000/10000KV;
  • No.of Cells(Lipo): 8000KV 2-3S 10000KV 1-3S;
  • Configuration: 9N12P;
  • Stator Length: 5mm;
  • Shaft Diameter: 1.5mm;
  • Motor (Dimension(Dia.*Len)): Φ 15.2*13.6mm;
  • Rotor: N52H arc magnets;
  • Weight: 3.8 grams.

VTX specifications

  • Number of channels: 48Ch (A,B,E,F,H,R bands);
  • Input voltage : 7-24V DC (2-6S);
  • Transmission power: 0mW / 25mW / 100mW / 200mW;
  • IPX antenna connector;
  • Output the camera voltage: 5 volts;
  • Size: 25 * 25 * 4.5 mm (20 x 20 mm mounting holes);
  • Weight: 3.5 grams.

3 COMMENTS

    • ‘HD’ has Caddx Vista Nebula camera(DJI goggles compatible) and the ‘4K’ has Caddx Loris 4K and 5.8G VTX (analogue FPV goggles compatible)

LEAVE A REPLY

Please enter your comment!
Please enter your name here