SG906 MAX3 EVO 2023: All time Best ZLL BEAST


As its name suggests, the SG906 Beast EVO Max3 evolved significantly in the last few years. This 2023 edition features an upgraded 3D obstacle avoidance system, a repeater mode communication system, and a 4K camera with a 60Mbps max bit rate.

The drone measures 17.4 x 8.4 x 7cm with folded arms and weighs 577 grams. It is equipped with powerful 1806-type brushless motors and 7″ propellers. According to ZLRC, you can fly confidently in windy conditions (up to level 6). The MAX3 EVO can reach up to 45km/h horizontal flight speed.

Being powered by a 3S 11.4V 3000mAh battery, it has about 30 minutes of flight endurance. Thanks to the fail-safe return to home (RTH) function, the EVO Max3 drone will return autonomously to the take-off point in case of remote controller signal loss or low flight battery voltage.

Price and availability

The ZLRC Beast EVO drone can be ordered from Banggood with one battery for $299.99 or with two batteries for $345.99. This price includes a remote controller, a set of spare propellers, USB cables, and a nice storage bag.

ZLL SG906 MAX3 BEAST EVO: Key features

  • Built-in repeater in the remote control for extended range
  • Front and rear visual obstacle avoidance function
  • Doubles satellite positioning system GPS/GLONASS
  • Optical flow positioning mode
  • 4K HD adjustable camera
  • Mechanical 3-axis brushless motor gimbal
  • Digtal image transmission
  • Smart flight modes
    •  Intelligent follow
    • Surround flight
    • Waypoint flight
    • Trajectory pointing flight
    • One key course reversal
  • Up to 30 minutes of battery life


  1. I just purchased a ZLL SG 906 Max 3 Evo and I want to register my drone but I also need to have a remote ID so I’m contacting you to find out if you can help me with my remote ID. I don’t see anything on the remote so if anyone there could help me out it’ll be much appreciated. Thank you.

  2. Hi, where can I find the manual in PDF format in Italian because the one supplied requires a microscope to read it, I tried to do a search on the web but I can’t find it

    • In the user manual, you should find a QR code, scan it with your phone this will allow to download and install the APP
      good luck!


Please enter your comment!
Please enter your name here