HGLRC MotoWhoop 90 HD with Vista digital FPV

Photo of HGLRC MotoWhoop 90HD drone

As its name says, the new HGLRC MotoWhoop 90 HD is built on a 90mm size frame with Whoop style duct blade guards. It comes with on-board CADDX VISTA Nebula Nano digital FPV. Hope to be compatible with the upcoming DJI FPV goggles V2, because I started to make savings for this new gear.

Its versatile Zeus F722 flight controller comes with an integrated 13A ESC. The tiny 3800KV motors are paired with 2″ AVAN Micro 4-leaf propellers. The HGLRC MotoWhoop 90 is 3S and 4S LIPO compatible. The manufacture suggests you use 4s/300-450mAh packs with XT30 plug.

According to your existing remote controller, you can opt for FlySky FS-A8S V2, FrSky R-XSR, XM+, or TBS Crossfire Nano RX radio receiver. The PNP edition is natively compatible with the DJI FPV transmitter.

While its bigger brother, the Sector 5 V3 is exclusively for outdoor fun, due to its small size the MotoWhoop 90mm is suitable for both, outdoor and indoor flying.

HGLRC MotoWhoop 90 features and specs

  • 90mm size carbon fiber frame with Whoop style blade protectors and 3D printed protective canopy;
  • Take-off landing support;
  • Zeus F7 AIO flight controller with integrated 13A ESC;
  • 1106 3800KV brushless motors with Emax AVAN Micro 2″ 4-leaf propellers;
  • CADDX VISTA Nebula Nano digital FPV system (camera + VTX);
  • 4S LIPO compatible (Recommend 4S/300-450mAh);
  • Optional FlySky FS-A8S V2, FrSky R-XSR, XM+ or TBS Crossfire Nano RX radio receiver.

Product details

Main parts
Main parts
3D printed parts
3D printed parts
Robust 360degree Whoop protectors
Robust 360degree Whoop blade protectors
Powerful brushless motors
1106 3800KV Brushless Motor
Wiring diagram and Pinout
Wiring diagram and Pin-out



Please enter your comment!
Please enter your name here