CNHL LI-ION 4S 3200mAh: For Long-Range and not-so!

CNHL LI-ION 4S 3200mAh review

Initially, LI-ION battery packs for long-range drones were homemade by hobbyists. They connected 4 or 6 cells serially to achieve the desired voltage. Sony VTC6 18650 batteries were used the most due to their excellent reliability. Panasonic and Samsung LI-ION proved to perform well also. In this review, we will have a closer look at the CNHL LI-ION 4S 3200mAh pack.

The biggest advantage of using Li-Ion cells over LiPo ones is that they have a higher capacity for the same weight. The CNHL LI-ION 4S 18650 3200mAh weighs only 204g, while a 4S 1800mAh LiPo has nearly the same weight. So theoretically, you should get close to double the flight time!

ChinaHobbyLine LI-ION 4S 3200mAh battery review

Disclosure: I received these batteries as part of a product review collaboration with China Hobby Line. Although the LI-ION packs were offered for free, all opinions in this article remain my own, and I was in no way influenced by the sponsor.

Unboxing

Upon my request, they sent me three LI-ION 4S 3200mAh packs. When I review drone batteries, I like to have more than one to compare if they perform the same. The packs came in a not-too-fancy black box. To protect the batteries, they were additionally wrapped in a bubble sheet.

Size

The 4S LIION pack measures about 36x36x68mm and weighs 204 grams. The “4S” number means that inside are four 18650 cells connected serially. The pack is double-wrapped in red and black nylon. On the front, there is a sticker that shows the basic parameters, and on the back, are some safety recommendations. It has a standard balance port and XT60 discharge connector. Overall, it feels solid and well-made.

Technical specifications

Cell type LI-ION 18650 DLG
Capacity 3200mAh
Voltage 14.8V / 4-Cell / 4S1P
Power 47.36Wh
Discharge rate 3C Continual / 6C Burst
Charge rate 5C Max
Output connector XT60 (AWG12 cable)
Balance connector JST / XH
Size 36X36X68mm
Weight 204 grams

Performance

Firstly I test it with my FlyFish-RC Volador 5″ racer quad with Flash 2306 motors and KM55A ESC. The total take-off weight is 691 grams. Despite being fully charged, the drone takes off at only 60% throttle and the cell voltage drops in just seconds from 4.18V to 3.5V. It looks like the 3C (burst 5C) is not enough for this heavy and powerful flying machine. To give it a second chance, I ordered an XT60 parallel adapter to try doubling the C-ratting by using two batteries at the same time.

LI-ION battery with 5" racing drone

Next, I test it with a much lighter 3″ CineWhoop with 439 grams take-off weight, including the battery. With this setup, I manage to fly but, at full throttle, still struggled to deliver the required power. To be able to fly without a constant low-voltage alarm, I had to change the trigger from 3.4V to 3V. When the motors are armed (idle speed), the drone requires 2A (33W). It absorbed 7A (114W) to rise from the ground and needed 16A (240W) to gain some speed. At continuous 15A usage, the battery voltage dropped from 16.2V to 13.8V, which is quite a lot.

LI-ION battery tested with 3" CineWhoop

In the best scenario, this pack could comfortably handle only an ultra-light 2.5″ Whoop, but these usually use XT30 connectors, not XT60.

Charging and real capacity

Typically, 18650 lithium-ion cells can be charged up to 4.2V and down to somewhere between 2V and 3V, depending on the technical specification for cut-off voltage. To be safe, never discharge lower than 2.7-2.9V. After you land in the rest state, you should go up to 3-3.2 volts. Always use a dedicated LI-ION charger to avoid damaging the battery or, even worse, catching fire.

Capacity test

To test the real capacity of the battery, firstly, I did five charging cycles, then discharge it to 3.1-V/cell  and charge it back at 3.2A (1C). My ToolKitRc M9 smart charger allows me to charge LION batteries to 4.15V only. When the charging program was finished, the display showed 2670mAh. Probably, till 4.20V, you could squeeze another 100-200 mah, but the 3200mah is quite optimistic. To confirm my measurements result, I did another experiment by charging two 4s/1300mAh LIPO packs using a freshly charged CNHL LI-ION 4S 3200mAh, the end voltage was 3.05V/cell -which means that it was fully empty.

Pricing and availability

These 4S Long-Range LI-ION packs can be ordered with 26% off from the manufacturer’s website at just $16.99 during their Spring Meg sale. There is also an option for a 2500mAh version with a higher C-rating (10C Continual / 20C Burst) for $28.99 (with Samsung cells).

power bank mode

CNHL LI-ION 4S 3200mAh Long-Range battery: Who’s and What’s for?

Personally, I would not recommend these CNHL LI-ION 4S 3200mAh batteries for FPV drones. The 3C-6C (~10A-20A) is too little for the job. Instead, the packs are perfect for powering your FPV Goggles, FPV monitor, or Transmitter. They can be used as a portable power source for your pocket charger to refuel small 450-850mAh batteries right on the flight field. I also use it together with my SEQURE SQ-001 60W soldering iron.

battery for soldering iron

Li-Ion versus Li-Po batteries: Which is better for FPV drones?

Li-Ion batteries, or lithium-ion batteries, use a chemical reaction between two electrodes—a positive, or anode, and a negative, or cathode—to store energy. Unlike first-generation rechargeable batteries, such as lead-acid, Li-ion batteries have a higher energy density and are capable of charging and discharging many thousands of times with very little degradation of their capacity over time. They are also much lighter and smaller than other types of rechargeable batteries, making them suitable for long-range drone flights (if they have at least 30C). 

Li-Po batteries, or lithium polymer batteries, also consist of two electrodes and utilize a chemical reaction to store energy. They are composed of a solid polymer electrolyte, allowing for a more custom design. LI-PO batteries can be made in different shapes and sizes than Li-Ion batteries. LiPo packs have a much higher discharge rate than Li-ion, meaning you can get much higher current out of them. To give you an idea, a high-quality FPV LiPo typically has around 100C to 130C of continuous discharge rate, while Li-ion has only 3 to 30C.

LI-ION vs LIPO

Comparison Table

  LI-ION 3200mAh LI-ION 2500mAh LIPO 1300mA LIPO 1800mA
Size 36X36X68mm 36X36X68mm 33.5X34X74mm 38.5X34X86mm
Weight 204g 196g 163g 209g
C-rating 3C Continual
6C Burst
10C Continual
20C Burst
100C Continual
200C Burst
120C Continual
240C Burst
3″ Whoop flight time 17min N/A 8min 10min
Price $16.99 $28.99 $14.49 $33.98
REVIEW OVERVIEW
Price/value ratio
Build quality
Flight time/Weight
Punch-out
Senior editor and co-founder of FirstQuadcopter.com. Everything started about 4 years ago when I purchased my first drone. I still own that Syma X5C . Since then I have had the luck to review and test more than 100 drones.
cnhl-li-ion-4s-3200mahThese CHNL 4s Li-ION packs are excellent for low-current applications. For example, powering accessories in drone racing and FPV, such as your FPV Goggles and radio transmitters. When it comes to power-hungry 5" racing quads, the pack fails due to a low C rating. The 3-6C is enough only to take off in the best case. If your drone drains more than 10A to stay in the air, you should forget about these 4S LI-ION packs!

5 COMMENTS

  1. I also bought two pieces of these batteries, but for the FPV monitor and not the drone. They are of decent quality for their price.

LEAVE A REPLY

Please enter your comment!
Please enter your name here