GEPRC TinyRadio ELRS Remote Controller
The beauty of ExpressLRS is that is open-source and can be used for free by any remote controller manufacturer. The GEPRC TinyRadio ELRS is not the first of its kind and probably not the last too. It comes in both frequency options (2.4GHz or 915Mhz) and mode 1 or mode 2 stick configuration.
To ensure a low-latency communication between the...
XIL 012MAX: 4K GPS drone under $200
The XIL 012MAX drone follows the epic folding design of the DJI Mavic series. With folded arms measures just 17x9x7.2cm allowing you to carry it easily in your backpack. Its remote controller also adopts a pliable design (folding antenna, phone holder, and handler).
Its 4K camera features 5GHZ WIFI real-time image transmission, 50X digital zoom, and remote angle adjustment. The...
FQ777 126C pocket hexa-copter
I own a couple of pocket multi-rotors like this FQ777 126C Spider and frankly, I love them all. I find it very practical that you can store and carry the aircraft inside the remote controller. The transmitter is small enough to fit inside of a larger pocket so you can take with you everywhere and anytime your favorite RC...
LiDiRC L10 Whoopee quadcopter with alt-hold
The LiDi RC L10 quadcopter is an upgraded version of the Eachine E010. While these two drones feature the same ducted propeller design, the LiDiRC L10 comes in addition with altitude-hold and Wi-Fi FPV.
The manufacturer of the L10 drone decided to use APP control instead of a physical remote controller. This means that you will need a smartphone in order to...
Story of my first tiny drone
Last summer I purchased my first quadcopter, a Syma X5C. It was perfect for a beginner like I was but, in a short time, I realized that I need something smaller for indoor flight. Bigger-sized quadcopters are perfect for outdoor flights but it's very hard to pilot them indoors, especially for a beginner.
At first, I thought that small quadcopters...
FLYCKER X4-550 Explorer
After testing many 350 mm size quads I think it would be interesting to review something bigger like the FLYCKER X4-550.
This new quadcopter from Flycker Intelligence is built based on the Scorpion-X4 550 mm carbon-fiber frame. For those who are interested to build their own quad, this can be also purchased separately. The biggest advantage of this lightweight air-frame is...
LDARC TINY R7 micro FPV drone: Features & Specs
LDARC, ex KingKong), just announced a new micro FPV racing quad called Tiny R7. Like its predecessor, the Tiny7, it is also equipped with brushed motors. The LDARC TINY R7 is available with 3 different type of radio receivers. According to your existing transmitter, you can opt between DSM2, FrSky or FlySky radio versions.
Thanks to its TinyWhoop ducted propeller design,...
IFlight XL10 V6 Analog Long-Range FPV drone
Being intended for long-range FPV flight, the new IFlight XL10 V6 features a high-power 1.6W analog VTX, ELRS/TBS Crossfire Nano RX, and an onboard GPS module. According to iFlight, the XING2 3110 motors and the 10" props provide level 7 wind resistance and a top speed of 140km/h (87mph).
The XL10 V6 frame is very similar to the recently reviewed...
FPV racing drone backpack by Realacc
This Realacc racing drone backpack is specially designed for FPV enthusiasts. It can store up to 3 FPV drones, remote controller, FPV goggles and other small accessories. The main section is accessed via the rear zipped flap, which is nice, because the back of the bag will not get dirty when you place it on the ground in order...
DJI RS3 and RS3 Pro DSLR cinema gimbals
It looks like 15th June become the official 'Gimbal Day'. Besides Zhiyun, DJI also announced two new Ronin DSLR cinema gimbals. While the DJI RS 3 can support up to 6.6 lbs (3 kg), the RS 3 Pro can support up to 10 lbs (4.5 kg). In order to accommodate larger cameras, the RS3 Pro also has longer arms...
Happymodel Cine8: DIY FPV Whoop kit for Insta360GO
Happymodel's Cine8 DIY kit includes all the parts needed to build your own CineWhoop style FPV drone. The box contains an 85mm size carbon fiber frame, 3D printed Whoop blade protectors, AIO F4 flight controller, FPV camera, VTX, and motors. Happymodel also includes a TPU Insta360 GO camera mount and a Tattu 3s/450mAh battery.
According to your existing transmitter, you...