Coming soon: Happymodel Larva X 100mm
Happymodel is planning to release a new small-sized FPV drone called Larva X100. As its name says, it adopts a true-X frame with a 100mm wheelbase. The Happymodel Larva X quadcopter is 2.5" propeller compatible and can be powered by 2s~3s LIPO batteries. The aircraft weighs about 50 grams without a battery.
Thanks to the versatile Crazybee F4 Pro...
Coming soon: Happymodel Mobula6 ultralight FPV drone
After the Mobula7, Happymodel came up with an even smaller brushless Whoop called Mobula6. Featuring only 20 grams, the Happymodel Mobula6 is probably the lightest FPV race drone. The highly-integrated Crazybee F4 Lite flight controller features integrated 5A ESC, 5.8G/25mW VTX, and radio receiver (Frsky or Flysky).
The SE0802 25000KV motors are paired with Gemfan 1219 3-leaf propellers. The manufacturer...
Happymodel Crux3: FPV drone for Insta360Go under $100
As you could read in our Insta360 Go review, weighing just 20 grams, this tiny camera can be successfully used on micro-size FPV drones like this Happymodel Crux3.
The Crux3 is built on a 115 mm carbon fiber frame. All the electronic parts, including the Caddx ANT camera, are well-protected by a lightweight canopy. At the end of each arm,...
Happymodel Sailfly-X: “Toothpick class” micro FPV drone
Following the great success of the Snapper7 and Mobula7, Happymodel recently released another micro-class FPV drone called Sailfly-X. Thanks to its ultralight 105 mm frame and powerful KV9000 brush-less motors it is suitable for both indoor and outdoor flights.
Like other "toothpick" FPV drones, the Happymodel Sailfly-X is also based on the versatile Crazybee F4 PRO flight controller. According to...
Happymodel Larva X HD: Toothpick & TinyWhoop
Currently, there are two major design approaches regarding small FPV racing drones, the Happymodel Larva X HD seems to fit for both of them. It can be conveniently converted from a Toothpick into a TinyWhoop.
Each arm of the 125mm size carbon fiber frame is equipped with an EX1203 motor. The Larva X HD is compatible with 2.5 and 3″...
Happymodel Snapper7 aka Crazybee: 75mm sized FPV drone
Equipped with powerful brushless motors, the Happymodel Snapper7 seems to be one of the best Tiny Whoop alternative for 2018. Thanks to the circular propeller protectors and compact size, the Crazybee can be safely used for indoor practice as well as for outdoor fun.
Thanks to the protective canopy, all electronic parts (AIO camera and flight controller) are well protected during...
Happymodel Moblite6 & Moblite7 brushless Whoops
Happymodel is about to release two new micro brushless Whoops, the Moblite6 and Moblite7. Both FPV drones weigh less than 20 grams and share the same hardware (motors, camera, and flight controller). In the case of the Happymodel Moblite6 the Unibell EX0802 motors are paired with 2-leaf propellers (Gemfan 1219 31mm) and on the Happymodel Moblite7 with 3-leaf ones...
Happymodel Cine8: DIY FPV Whoop kit for Insta360GO
Happymodel's Cine8 DIY kit includes all the parts needed to build your own CineWhoop style FPV drone. The box contains an 85mm size carbon fiber frame, 3D printed Whoop blade protectors, AIO F4 flight controller, FPV camera, VTX, and motors. Happymodel also includes a TPU Insta360 GO camera mount and a Tattu 3s/450mAh battery.
According to your existing transmitter, you...
Happymodel Mobula7: Brushless Whoop under $100
Yesterday, I had some nice flights with my brand new Blade Inductrix FPV+ drone. While the Happymodel Mobula has similar size and design, it adopts brushless motors instead of brashed ones. This upgrade should provide even better flight performance.
Based on the versatile F3 Pro flight controller, Happymodel Mobula7 can be configured with 3 different flight modes. While newbies can opt for Angle...
Happymodel Mantis85: Micro FPV drone with F4 FC
Happymodel, a relatively new drone brand just announced their Mantis85, a compact brush-less FPV drone. Built on a 85 mm sized carbon fiber frame, the Happymodel Mantis85 is suitable for outdoor as well as for indoor flights.
Thanks to the versatile F4 flight controller, Mantis85 can be configured with 3 different flight modes. While Angle mode is suitable for newbies,...
Happymodel Trainer90: DIY FPV drone kit
As fun as it can be to enjoy flying your own FPV drone, you might have a little extra fun with building your own. Happymodel Trainer90 contains all the essential parts required to build a flying machine. In addition, the package also includes a 600TVL camera with integrated 5.8G video transmitter. Due to its small size, it is an excellent...